LVD1U200 Series is a 200 amp LVD (Low Voltage Disconnect) panel which can be connected for either load or battery disconnect and can be used for load shedding applications where non critical loads are switched off at an earlier point in the battery discharge cycle to conserve power to critical loads.
LVD1U200 is a 200 amp LVD 1RU high panels can be configured for 12, 24 or 48 volts operation with either positive or negative ground and are supplied complete with brackets that permit mounting in both 19-inch and 23-inch relay racks or cabinets.
Multiple fixing positions enable mounting of this 200 amp LVD panel from the front of the rack with offsets every quarter-inch from front to back to align with existing equipment. An alarm condition is indicated by a red LED on the front panel as well as Form C relay contacts.
- 200A LVD
- 1RU, 19- or 23-Inch Rack Mounting
- Operating Voltage: 12, 24 or 48VDC
- Positive or Negative Ground
- LVD in Series with Battery or Load
- Form C Relay Contacts
- Red LED Alarm
- Operating Temp. -20C to 70C