Search by Part #:    ADVANCED 
SEARCH

Home

AC/DC

DC/DC

Other

Applications

Manufacturers

Home  |  About Us  |  Resources  |  Terms  |  Contact Us
Search by Part #:    ADVANCED 
SEARCH

Low Voltage Disconnect Panels. They can be connected for either load or battery disconnect. Comes with brackets for 19″ or 23″ relay rack mounting. LVD1U Series is a 70 amp LVD (low-voltage disconnect panel) designed for maximum flexibility which can be connected for either load or battery disconnect. The one mounting position (1.75 inches) 100 amp LVD panel can also be configured as single or dual (A/B) disconnects.

Optional is a bypass switch which allows the user to bypass the LVD contactor. An LVD or battery alarm is indicated by a red LED. Form C relay contacts also indicate an LVD or battery breaker alarm. The A and B sections of the dual 100 amp LVD panel can be separately configured for 24 or 48 volts and positive or negative ground. LVD1U Series 70 amp LVD panels come with brackets that permit mounting in either a 19- or 23-inch relay rack. They can be mounted from the front of the rack with offsets every quarter-inch from front to back to align with existing rack-mounted equipment.

Product Features

  • 70A LVD
  • Single or Dual (A/B) LVDs
  • 1RU, 19- or 23-Inch Rack Mounting
  • Operating Voltage: 12, 24 or 48VDC
  • Positive or Negative Ground
  • Battery Circuit Breaker:100A
  • LVD in Series with Battery or Load
  • LVD Bypass Switch, Optional
  • Red LED Alarm
  • Form C Relay Contacts
  • Operating Temp. -20C to 70C
Download Datasheet
lvd400-series RFQ SAMPLE LVD400 Series 400 amp LVD (low-voltage disconnect) panels are designed for maximum flexibility. They can be used for either load or...
lvd600-series RFQ SAMPLE LVD600 Series 600 amp LVD (low-voltage disconnect) panels are designed for maximum flexibility. They can be used for either load or...
lvd1u200-series RFQ SAMPLE LVD1U200 Series is a 200 amp LVD (Low Voltage Disconnect) panel which can be connected for either load or battery disconnect and can be...